Panasonic ELC500 User Manual page 66

Point
System connection is used for connecting configuration software or programming tool.
For connecting configuration them, use it with initial setting.
■Open method (Server / Client)
Item
Server connection (Any destination)
Server connection (specified)
■Open method (Automatically / Manually)
Item
Automatically
Manually
■In case of selecting 'Server connection (specified)' for 'Open method (Server / Client)'
Item
IP address
Port No.
Note
Either IP address or port number must be specified with except 0 (0,0,0,0).
Description
Wait for connections from unspecified clients.
Wait for connections from specified clients.
Description
When power on, it opens the communication line with each device
according to system connection settings automatically.
Open the connection and wait for a connection from client.
Do not select this. It can't open connection.
Description
When IP address set to 0.0.0.0, it receives data from any destination.
When it set to except 0.0.0.0, it receives data from the specified destination.
When port number set to 0, it receives data from any destination.
When it to except 0, it receives data from the specified destination.
58
ELC500 Control unit