Special Control - Panasonic ELC500 User Manual

ELC500 Control unit
5.6.7

Special Control

Setup items related to start control and cyclic control.
5.6.7.1 Start Control
This is the control that shifts start time for each group in order to reduce peak power.
Remote I/O units are divided to 4-group and it controls them to make status at alarm 3 at start.
After it passes the set time, it will cancel the control one by one.
(Output status of remote I/O unit will be 'No alarm'.)
A: time to start at first B: time to start next group
Ex.)
1. When it start 'Start control' (trigger is established.), remote I/O unit that set to start control will be
output state that alarm 3 occurs.
2. After it passes [Time A], it cancels the control of group 1. (No alarm output status)
3. After it passes [Time B], it cancels the control of group 2. (No alarm output status)
4. After that, it will cancel the control of group 3, group 4
126