Panasonic ELC500 User Manual page 89

<Monitor data (register)>
Select 'Monitor data (register)' for type. When compare the setting register value and input condition
value and it meets the conditions, a trigger occurs.
[MEWTOCOL]
Item
(a) Name
(b) Communication I/F
(c) Connection device
(d) Device
*3 Main unit
(e) Data style
(f) Reading order
Description
Set trigger name.
<Set range> 32-letter or less
Set
communication device used to collect relay data.
<Initial> Main unit
<Set range> Main unit/COM0 /COM1 /COM2 /Ethernet
*2 Set device to collect relay data.
Set register data to collect.
<Initial> Device: DT
MEWTOCOL-COM
<Set range> Device: DT / LD / FL / WX / WY / WR / WL /
MEWTOCOL7-COM
General communication
Set register data to collect.
MODBUS RTU <Initial> Device: Holding register (4)
MODBUS TCP <Set range> Device: Holding register(4)/Input register(3)
Set data style of register data to collect.
<Initial> DEC1W(Unsigned)
<Set range>
DEC1W, DEC1W(Unsigned),
DEC2W, DEC2W(Unsigned),
DEC4W, DEC4W(Unsigned),
single precision real number,
double-precision real number
*6 Set reading order when it saves collecting data by
MODBUS RTU or MODBUS TCP.
<Initial> Low word – High word
<Set range> Low word – High word / High word - Low word
[MODBUS]
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
communication
number: 0
SV / EV *4
Number: 0 to 99999
Number: 0 to FFFF
81
ELC500 Control unit
I/F that is connected
Number: 0
*5
the
*1