Online Mode - Delta Electronics AH500 Operation Manual

8.4.6.1 Online Mode

(1) After users click Online Mode on the Option menu, or
be in the online mode. If the users click
mode.
(2) Before the hardware configuration enters the online mode, the system checks whether the hardware
configuration stored in the CPU module is the same as the hardware configuration in the system
configuration area. If the hardware configuration stored in the CPU module is different from the hardware
configuration in the system configuration area, the system will ask users to download the hardware
configuration again.
(3) After the hardware configuration enters the online mode, the statuses of the modules displayed in the
system configuration area will vary with the actual statuses of the modules. The statuses of the LED
indicators on the CPU module displayed in the system configuration area are the same as the actual
statuses of the LED indicators on the CPU module. The LED indicators are the RUN LED indicator, the
ERROR LED indicator, and the BUS FAULT LED indicator from top to bottom.
The system configuration is different from the actual system configuration.
(No extension rack is scanned.)
8 - 6 4
again, the hardware configuration will not be in the online
An error occurs in the module.
The module is in a warning status.
The module is normal.
The system configuration is different from the actual system
configuration. (An unknown module is installed in this slot.)
The system configuration is different from the actual system
configuration. (No module is installed in this slot.)
C h a p t e r 8 H a r d wa r e C o n f i g u r a t i o n
on the toolbar, the hardware configuration will