Setting The Basic Cpu Parameters; Cpu: Name - Delta Electronics AH500 Operation Manual

C h a p t e r 8 H a r d wa r e C o n f i g u r a t i o n

8.2.2 Setting the Basic CPU Parameters

8.2.2.1

CPU: Name

After users click the CPU tab at the top of the window, and the Name tab at the bottom of the window, they can
type 31 characters at most in the Name box, and 60 characters at most in the Comment box. There is no
restriction on characters which can be typed in the boxes. Characters typed in the boxes can include special
marks and spaces. However, the users have to notice that a Chinese character occupies two characters.
After an ISPSoft project is created, the project name will be taken as the default name of the CPU module, and
the default name of the CPU module will be attached to the model in the project management area. Users can
change the default name of the CPU module in the Name box later.
Users can identify a device by means of the name of the device. When several devices are connected on a
network, users can check whether a device connected to the computer is the device they expect by means of
the name of the device. To prevent unexpected effect on other CPU modules, if users want to download/upload
the program, but the name of the CPU module is different from the name attached to the model in the project
management area, the system will remind the users to check the name of the CPU module and the name
attached to the model in the project management area.
*. The parameters set in HWCONFIG must be downloaded to the CPU module so that they can take effect. (Please
refer to section 8.2.6 or section 8.4.4 for more information.)
8 - 3 0