Delta Electronics AH500 Operation Manual page 335

(2) After the users select the destination device toward which packets are relayed, they have to click
the toolbar, or Routing Detect on the PLC menu.
The users can also right-click the destination device, and then click Routing Detect on the context menu.
(3) After Routing Detect is clicked, the display of the network architecture in the working area will change,
and the Routing detect status window will appear. The way in which the node which is designated as the
first station is connected to the computer is also shown in the working area. Please see the red circle in the
figure below.
C h a p t e r 9 N e t w o r k C o n f i g u r a t i o n
on
9 - 3 5