Description Of Downloading Parameters - Delta Electronics AH500 Operation Manual

A H 5 0 0 O p e r a t i o n M a n u a l
parameters are downloaded to the node.
9.3.2.2

Description of Downloading Parameters

If the users want to download parameters, the Routing Mode checkbox in the Select a Driver window must be
unselected. Please refer to section 9.1.3 for more information.

Single node
The users have to select a node in the working area.
After the users click Download to PLC on the PLC menu, or
window will appear. The users can also open the Optional Download window by right-clicking the device
they select, and clicking Download to PLC on the context menu.

Multiple nodes
The users have to select an Ethernet network in the working area. After the users click Download to PLC
on the PLC menu, or
connection is consistent with the setting in NWCONFIG, parameters can be downloaded to the nodes
connected to the Ethernet network.
9 - 3 8
on the toolbar, the Optional Download window will appear. If the actual
on the toolbar, the Optional Download