Delta Electronics AH500 Operation Manual page 509

Error
Description
code
The signal received by channel 6
exceeds the range of inputs
16#A406 which can be received by the
hardware. (The ERROR LED
indicator is ON.)
The signal received by channel 7
exceeds the range of inputs
16#A407 which can be received by the
hardware. (The ERROR LED
indicator is ON.)
16#A600 Hardware failure
16#A601 The external voltage is abnormal.
Internal error
16#A602
The CJC is abnormal.
Internal error
16#A603 The factory correction is
abnormal.
The signal received by channel 0
exceeds the range of inputs
16#A800 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 1
exceeds the range of inputs
which can be received by the
16#A801
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 2
exceeds the range of inputs
16#A802 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 3
exceeds the range of inputs
16#A803 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 4
exceeds the range of inputs
16#A804 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 5
exceeds the range of inputs
16#A805 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 6
exceeds the range of inputs
16#A806 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
C h a p t e r 1 2 Tr o u b l e s h o o t i n g
Remedy
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 6 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 7 exceeds
the range of inputs which can be received by the
hardware.
1. Check whether the backplane is normal.
2. Check whether the module operate normally.
Check whether the external 24 V power supply to the
module is normal.
Please contact the factory.
Please contact the factory.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 0 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 1 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 2 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 3 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 4 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether The signal received by channel 5 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 6 exceeds
the range of inputs which can be received by the
hardware.
1 2 - 4 3