Downloading/Uploading The System Parameters - Delta Electronics AH500 Operation Manual

A H 5 0 0 O p e r a t i o n M a n u a l

8.4.4 Downloading/Uploading the System Parameters

The parameters set in HWCONFIG must be downloaded to the CPU module so that they can take effect.
Owing to the fact that HWCONFIG adopts the communication setting in ISPSoft, users have to make sure that
ISPSoft is connected to the CPU module normally before the parameters are downloaded/uploaded. Please
refer to section 2.4 in ISPSoft User Manual for more information about communication setting. If users want to
download/upload the program, but the name of the CPU module is different from the name attached to the
model in the project management area, the system will remind the users to check the name of the CPU module
and the name attached to the model in the project management area.

Downloading the system parameters
After users click Download on the Option menu, or
appear. The relative parameters in CPU and modules that you have selected will be downloaded but not
the parameters in the intelligent modules. After the users click OK, the parameters will be downloaded to
the CPU module.
*. AH5x0 series cannot select the items to be downloaded.

Uploading the system parameters
After users click Upload on the Option menu, or
module will be uploaded to HWCONFIG. The items which will be uploaded include the hardware
configuration, the parameters in the modules, and the parameters in the CPU module, but do not include
the parameters in the intelligent modules.
on the toolbar, the Transfer Items window will
on the toolbar, the system parameters in the CPU
8 - 6 1