Configuring A Module; Adding A Module - Delta Electronics AH500 Operation Manual

A H 5 0 0 O p e r a t i o n M a n u a l

8.1.2 Configuring a Module

8.1.2.1 Adding a Module


Method 1
After users select a module which will be added to the product list, they can drag it to a vacant slot.
*. If users want to drag a module on the product list to the system configuration area, the module can only be put
on a vacant slot. If the module is dragged to an occupied slot, the system will prohibit this operation.

Method 2
(1) After users click a vacant slot, the Module Selection window will appear. The users can also
right-click a vacant slot, and click Add on the context menu to open the Module Selection window.
8 - 5