Delta Electronics AH500 Operation Manual page 269

A H 5 0 0 O p e r a t i o n M a n u a l
(1) Type a trigger name and an interval of triggering the sending of an email in the Trigger Setting section.

Trigger Name
Users can type a trigger name in the Trigger Name box. Only English letters, numerical digits, or
special marks can be typed in the box. A trigger name is composed of 16 characters at most. If the
sending of an email is due to this trigger, the trigger name will be put in the subject of this email.

Trigger Interval
Users can set an interval of triggering the sending an email. Ten minutes are taken as a unit. If the
condition of triggering the sending of an email is met, the system will send the email every specific
period of time, and the email will not sent within the intervals.
(2) Select a condition of triggering the sending of an email in the Trigger Mode section.

CPU Error
If an error occurs in the CPU module, the condition of triggering the sending of an email is met. Please
refer to operation manuals for more information about errors occurring in CPU modules. After users
select the CPU Error option button, they have to select Fatal Error Only or All Errors in the
drop-down list box at the right side of the option button.
(a) Fatal Error Only: If a fatal error occurs in the CPU module, the condition of triggering the sending
(b) All Errors: If an error occurs, the condition of triggering the sending of an email is met.

CPU (STOP<=>RUN)
When the CPU module begins to run, or when the CPU module stops running, the condition of
triggering the sending of an email is met.
of an email is met.
8 - 4 3