Delta Electronics AH500 Operation Manual page 202

A H 5 0 0 O p e r a t i o n M a n u a l
(2) The hardware configuration is displayed in the window. Before the hardware configuration is
downloaded to the CPU module, users have to make sure that the actual hardware configuration is
the same as the hardware configuration in the window.
(3) After the users click Download on the Option menu, or
window will appear. The hardware configuration will be downloaded to the CPU module after OK is
clicked.
(4) After the hardware configuration is downloaded to the CPU module successfully, the BUS FAULT LED
indicator on the CPU module will be OFF. The users can close the HWCONFIG window. If the BUS
FAULT LED indicator on the CPU module is still ON or blinking, the CPU module is in an abnormal
state. Please make sure that the actual hardware configuration is the same as the hardware
configuration in the HWCONFIG window again, or refer to the operation manual for more information
about eliminating the error. Please refer to chapter 8 for more information about HWCONFIG.

Downloading the program
After the program is compiled successfully, the users can click the PLC menu, point to Transfer, and click
Download. The users can also click
the Program checkbox and the relative Comments checkbox in the Transfer Setup window so that the
program in the CPU module can be uploaded later, and then click OK.
6 - 2 6
on the toolbar, the Transfer Items
on the toolbar after the program is compiled successfully. Select