Configuring A Module - Delta Electronics AH500 Operation Manual

C h a p t e r 6 W r i t i n g a P r o g r a m

6.4.1 Configuring a Module

In the HWCONFIG window, there is an eight-slot backplane on which a CPU module and a power supply
module are installed. However, the backplane used in this example is the four-slot backplane AHBP04M1-5A
on which the digital I/O module AH16AP11R-5A is installed.
If users want to replace the backplane, they can right-click the left side of the rack in the system configuration
area, click Replace on the context menu, and double-click AHBP04M1-5A in the Rack Selection window.
Unfold the Digital I/O Module section on the product list, find AH16AP11R-5A, and drag the module to a
vacant slot on the backplane in the system configuration area. After the module is added successfully, the
related information and the devices assigned to the module will be listed in the table at the bottom of the
window.
6 - 5