Delta Electronics AH500 Operation Manual page 245

A H 5 0 0 O p e r a t i o n M a n u a l

Method 2
(1) Click a slot on which a module will be pasted in the system configuration area or on the information list.
(2) Click Paste on the Edit menu, or
Additional remark
When a module is copied/pasted, the parameters in the module are processed as follows.

Input/Output device range: The input/output devices assigned to the module cut are automatically
assigned to the module pasted.

Comment about the module: The comment about the module copied is copied into the module pasted.

Parameters in the module: The parameters in the module cut are copied into the module pasted.

Data registers: The data registers assigned to the module copied are automatically assigned to the
module pasted.

Parameters in the intelligent module: The setting of the parameters in the intelligent module is not
copied, and is restored to the default values. The users have to set the parameters again.
As the example below illustrates, the module on slot 0 is the module which is copied, and the module on slot 1
is the module which is pasted.
*. Some intelligent modules can be set by means of exclusive configuration tools. Please refer to section 8.3.4 for
more information.
on the toolbar.
8 - 1 9