Adjusting Or Deleting Devices Or Networks - Delta Electronics AH500 Operation Manual

A H 5 0 0 O p e r a t i o n M a n u a l

9.2.3 Adjusting or Deleting Devices or Networks


Adjusting the order in which the nodes in the working area are arranged
Users can change the order in which the nodes in the working area are arranged by dragging a node to a
different position. The nodes in the working area can only be at the same level, and increase rightwards.
The users can not drag a node to a position above or under another node.

Deleting a single device by means of a context menu
After users right-click a PLC, and click Delete the Device on the context menu, the PLC and the modules
connected to the PLC will be deleted. However, the PLC for which a project is created and the modules
connected to the PLC can not be deleted.
After the users right-click a module, and click Delete the Module on the context menu, the module will be
deleted.
9 - 2 0