Setting The Parameters In A Module - Delta Electronics AH500 Operation Manual

C h a p t e r 8 H a r d wa r e C o n f i g u r a t i o n
Click in the Module Name box, select a module model in the Module Selection window, and double-click
the module model.
Select a version number in the Firmware Version drop-down list cell. After the setting is complete, users can
click OK to change the firmware versions of the modules specified.
Additional remark
Users can know the firmware version of an actual module by clicking I/O Scan on the Option menu. If ISPSfot
is connected to the CPU module, users can get the information about the firmware version of an actual module
in the Module Information window. If users want to know the firmware version of an actual module by click I/O
Scan on the Option menu, or view the information about the firmware version of an actual module in the
Module Information window, ISPSoft must be connected to the CPU module normally, and the installation of
modules must be completed. Please refer to section 8.4.5 and section 8.4.6 for more information.

8.3.2 Setting the Parameters in a Module

Users can set the parameters in every module configured in HWCONFIG. The functions and characters of
every module depend on the setting of the parameters. If users want to set the parameters in a module, they
can double-click the module in the system configuration area. The system will automatically open the
Parameter Setting window.
8 - 5 2