00 - 03
Frequency Setting (F) or Closed Loop Control Setting Point
This parameter displays the frequency command set by the user.
00 - 04
Output Frequency (H)
This parameter displays actual output frequency of the AC drive.
00 - 05
Output Current (A)
This parameter displays actual output current of the AC drive.
00 - 06
DC-BUS Voltage (U)
This parameter displays DC-BUS voltage of the AC drive.
00 - 07
Output Voltage (E)
This parameter displays output voltage of the AC drive.
00 - 08
Output Power Factor (n)
This parameter displays output power factor.
00 - 09
Output Power (kW)
This parameter displays output power of the AC drive.
Revision July 2008, EG03, SW V1.06
Bit 8: Master frequency source via communication interface
Bit 9: Master frequency source via analog
Bit10: Running command via communication interface
Bit11: Parameter locked
Bit12~15: Reserved
Chapter 4 Parameters|
Factory setting: Read Only
Factory setting: Read Only
Factory setting: Read Only
Factory setting: Read Only
Factory setting: Read Only
Factory setting: Read Only
Factory setting: Read Only
4-25