Commissioning On The Profinet Io - Siemens SIMATIC ET 200S Manual

Brief Instructions on Commissioning ET 200S
2.2

Commissioning on the PROFINET IO

Introduction
The following simple example teaches you step by step how to commission the
ET 200S on PROFINET IO:
• Installing and wiring the ET 200S
• Configuration with STEP 7 using the device database file
• Integration in the user program
• Switching the ET 200S on
• Evaluation of interrupts and diagnoses:
-- Removal and insertion of modules
-- Switching off the load voltage on the power module
-- Wire break of the actuator wiring on the digital output module
2-10
ET 200S Distributed I/O System
EWA-4NEB 780602402-12