Installation - Siemens SIMATIC ET 200S Manual

Installation

Important information
Warning
!
Open operating equipment
The modules of an ET 200S are open operating equipment. This means that you
can only install the ET 200S in cases, cabinets or electrical plant rooms where
they will only be accessible with a key or a tool. Only trained or authorized
personnel should have access to the cases, cabinets or electrical plant rooms.
Simple installation
The ET 200S distributed I/O system is designed for simple installation.
Chapter overview
Chapter
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Installation rules, installation position, rail, installation measurements
and clearances
Installing the interface module
Installing the TM-P and TM-E terminal modules
Replacing the terminal box on the terminal module
Installing the terminating module
Installing the shield contact
Applying slot number labels and color identification
labels
Setting the PROFIBUS Address
Description
4
Page
4-2
4-4
4-6
4-8
4-10
4-11
4-13
4-15
4-1