1Step 5V/204Khz - Siemens SIMATIC ET 200S Manual

Commissioning and Diagnostics
1COUNT 24V/100kHz
Table 6-17 1Count 24V/100kHz
Error type
1 00001: Short-circuit
D
5 00101: Overtemperature
D
6 00110: Wire break
D
9 01001: Error
D
16 10000: Parameter
D
assignment error
1COUNT 5V/500kHz
Table 6-18 1Count 5V/500kHz
Error type
1 00001: Short-circuit
D
5 00101: Overtemperature
D
6 00110: Wire break
D
9 01001: Error
D
16 10000: Parameter
D
assignment error
26 11010: External error/fault
D

1STEP 5V/204kHz

Table 6-19 1STEP 5V/204kHz
Error type
1 00001: Short-circuit
D
9 01001: Error
D
16 10000: Parameter
D
assignment error
6-44
Meaning
Short circuit of the sensor
supply or the actuator.
Digital output is overloaded.
Line to the actuator interrupted.
Internal module error occurred.
Load voltage from the power
module is too low.
Parameters have not been
assigned to the module.
Meaning
Short circuit of the sensor
supply or the actuator.
Digital output is overloaded.
Line to the actuator interrupted.
Internal module error occurred.
Parameters have not been
assigned to the module.
Wire break/short circuit of the 5
V sensor signals:
A, /A, B, /B, N, /N,
Meaning
Short circuit of the sensor
supply.
Internal module error occurred.
Parameters have not been
assigned to the module.
Remedy
Check the wiring to the sensor.
Correct the process wiring.
Correct the process wiring.
Correct the process wiring.
Replace the module.
Correct the process wiring.
Check the load voltage.
Adjust the parameter
assignment.
Remedy
Check the wiring to the sensor.
Correct the process wiring.
Correct the process wiring.
Correct the process wiring.
Replace the module.
Adjust the parameter
assignment.
Correct the parameter settings
Remedy
Check the wiring to the
switches. Correct the process
wiring.
Replace the module.
Adjust the parameter
assignment.
ET 200S Distributed I/O System
EWA-4NEB 780602402-12