Im151-1 High Feature Interface Module (6Es7 151-1Ba00-0Ab0) - Siemens SIMATIC ET 200S Manual

8.5 IM151-1 HIGH FEATURE interface module
(6ES7 151-1BA00-0AB0)
Order number
6ES7 151-1BA00-0AB0
Features
The IM151-1 HIGH FEATURE interface module has the following features:
• It connects the ET 200S with the PROFIBUS DP
• It prepares the data for the electronic modules and motor starters that are fitted.
• It supplies the backplane bus.
• It can be synchronized with the DP cycle (clocking).
• The firmware can be updated via PROFIBUS DP using HWCONFIG.
• The PROFIBUS DP address of the ET 200S can be set by means of switches.
• If the 24 VDC power supply is disconnected, the IM151-1 HIGH FEATURE
interface module is also disconnected.
• The maximum address space is 244 bytes for inputs, and 244 bytes for outputs.
• The reference potential M of the rated supply voltage of the IM151-1 HIGH
FEATURE to the rail (protective conductor) is connected by means of an RC
combination, thus permitting an ungrounded configuration.
• Operation as a DPV0 slave.
-- Acyclic data exchange (read/write data record):
class 2 services
• Operation as a DPV1 slave.
-- Acyclic data exchange (read/write data record):
class 2 services and class 1 services
-- Diagnostics Interrupts
-- Process Alarms
-- Removal/Insertion Interrupt
• A maximum of 63 modules can be operated with the IM151-1 HIGH FEATURE.
• The maximum bus length is 1 m.
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Interface Modules
8-19