Wiring The Im151-1 Fo Standard Interface Module - Siemens SIMATIC ET 200S Manual

5.4.7

Wiring the IM151-1 FO STANDARD interface module

Features
Connect the supply voltage and the fiber-optic cable to the IM151-1 FO
STANDARD interface module by means of a simplex connector.
Prerequisites
• Wire the interface module with the supply voltage switched off.
• Adhere to the wiring rules (see Section 5.4).
Tool required
3 mm screwdriver
Required accessories
• Packing with simplex connectors and polishing sets (6GK1901-0FB00-0AA0)
• Packing with plug adapters (6ES7 195-1BE00-0XA0)
• Fiber-optic duplex line see IK PI catalog
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Wiring and Fitting
5-21