Siemens SIMATIC ET 200S Manual page 595

Installation, 4-1, 4-4, 4-10, 4-11, 4-12, 4-13
color identification labels, 4-13
Interface module, 4-4
Shield contact, 4-11, 4-12
slot number labels, 4-13
Terminating module, 4-10
Installation measurements, 4-3
Installation position, 4-2
Installation rules, 4-2
Installing simplex connectors, 5-22
Insulation testing, 7-10
Interface module, 3-7
Interface module IM151--1 BASIC, 8-8, 8-9
Block diagram, 8-9
Parameters, 8-1
Technical specifications, 8-10
Terminal assignment, 8-9
Interface module IM151--1 FO STANDARD,
8-15, 8-16
Block diagram, 8-16
Technical specifications, 8-17
Terminal assignment, 8-16
Interface module IM151--1 HIGH FEATURE,
8-19, 8-20
Block diagram, 8-20
Parameters, 8-3
Technical specifications, 8-21
Interface module IM151--1 STANDARD, 8-11,
8-12
Block diagram, 8-12
Technical specifications, 8-13
Terminal assignment, 8-12
Interface module IM151--3 PN, 8-23, 8-24
Block diagram, 8-24
Parameters, 8-4
Interface module IM151-1, 1-7
Interface Modules, 8-1
Interface modules and applications, 3-7
interface modules IM151--1 STANDARD and
IM151--1 FO STANDARD, Parameters, 8-2
Interference Frequency Suppression, 12-41
Isolated sensors, 12-19
Isolation, 5-6
L
Labeling sheet, 1-9
Leakage resistance, E-1
Length of the diagnostic message frame, 6-25
Life of an MMC, 8-26
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
M
Manual, purpose, iii
Manual-Package, 1-14
Manuals, other, vii
Manufacturer ID, 6-33
Master PROFIBUS address, 6-33
Maximum configuration, 3-45
Measured Value Resolution, 12-4
Measuring range with SIMATIC S7, 12-4
Measuring ranges of the analog input modules
in S7-format, 12-5
Mechanical environmental conditions, 7-9
Minimum clearances, 4-4
Minimum clearances for installation, wiring,
and ventilation, B-1
Interface module, B-2
Shield contact, B-8
Terminal modules with an electronic module
inserted, B-3
terminal modules with an electronic module
inserted, B-6
Terminating module, B-8
MMC, Life, 8-26
Module diagnosis, 6-34
Module status, 6-36
Motor starters, 6-4
N
No grouping, 6-9
Non--isolated sensors, 12-20
O
Option handling, 3-34
Features, 3-34
How it works, 3-35
parameter assignment, 3-38
Prerequisites, 3-36
Options, 6-26, 6-67
controlling, 3-40
monitoring, 3-40
Index
Index-5