Analog Value Visualization - Siemens SIMATIC ET 200S Manual

Analog Electronic Modules
Chapter
12.15
12.16
12.17
12.18
12.19
12.20
12.21
12.1

Analog value visualization

In chapter
12.1.1
12.1.2
12.1.3
Electronic modules with analog inputs
With the electronics module with analog inputs, continuously variable signals, such
as those occurring in temperature measurement and pressure measurement, can
be acquired, evaluated, and converted to digital values for further processing.
Electronic modules with analog outputs
With the electronics modules with analog outputs, digital values set by a controller
can be converted to a corresponding analog signal (current) in an analog output
module and used to control suitable actuators (setpoint input for speed controllers,
temperature controllers and similar).
12-2
2AI RTD High Feature analog electronic module
(6ES7 134-4NB50-0AB0)
2AI TC Standard analog electronic module
(6ES7 134-4JB00-0AB0)
2AI TC High Feature analog electronic module
(6ES7 134-4NB00-0AB0)
2AO U Standard analog electronic module
(6ES7 135-4FB00-0AB0)
2AO U High Feature analog electronic module
(6ES7 135-4LB01-0AB0)
2AO I Standard analog electronic module
(6ES7 135-4GB00-0AB0)
2AO I High Feature analog electronic module
(6ES7 135-4MB01-0AB0)
Analog Value Representation for Measuring Ranges with
SIMATIC S7
Analog value visualization for measurement ranges of the analog
input in SIMATIC S7 format
Analog value visualization for measurement ranges of the analog
output in SIMATIC S7 format
Topic
Description
ET 200S Distributed I/O System
Page
12-82
12-90
12-95
12-99
12-103
12-107
12-111
Page
12-4
12-5
12-15
EWA-4NEB 780602402-12