Commissioning
10.2 Commissioning the ET 200SP for PROFINET IO
10.2
Commissioning the ET 200SP for PROFINET IO
Requirements
● The CPU/interface module is in the "Factory settings" status or has been reset to factory
settings (see section Interface module
(http://support.automation.siemens.com/WW/view/en/55683316/133300)).
● For CPU: The SIMATIC memory card is as delivered or has been formatted.
10.2.1
ET 200SP CPU as an IO controller
Configuration example
To use the ET 200SP distributed I/O system as an IO controller, you require the
CPU 151xSP-1 PN.
Figure 10-1
170
ET 200SP CPU as an IO controller
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF