Wiring The Im151-1 Fo Standard; Inserting And Identifying The Electronic Modules - Siemens SIMATIC ET 200S Manual

Wiring and Fitting
Caution
!
Do not look directly into the opening of the transmission diodes.
The light beam that comes out could damage your eyes.
PROFIBUS DP
(fiber-optic cable)
Supply voltage
(1L+, 2L+, 1M, 2M)
Figure 5-13
5.5

Inserting and identifying the electronic modules

Features
• The electronic modules are inserted in the terminal modules.
• A labeling strip allows you to identify the electronic modules.
• Electronic modules are:
-- Self-coding
-- Type-coded
The first time you insert an electronic module, a code element engages on the
terminal module. This mechanically prevents the wrong electronic module from
being inserted.
Prerequisites
Adhere to the rules below for inserting electronic modules. See Section 3.5 (The
electronic modules you can use on the various terminal modules).
5-24
Labeling strip
ET 200S

Wiring the IM151-1 FO STANDARD

Transmitter
1
Receiver
Simplex connector
ET 200S Distributed I/O System
Handle
2
EWA-4NEB 780602402-12