Intermatic InTouch CA5500R User Manual page 78


InTouch™ User Guide
Select Rename Event,
3.
then press
<ENTER>
screen displays a list of
the events programmed in
your system.
4. Select the event you want
to rename and press
. The first letter of
<ENTER>
the existing event name
("E" in "Event 1") is highlighted.
5. Scroll with the
character of the new name, then with the
arrow to select the second character, and continue.
The characters repeat in a loop in the order shown
below, starting from wherever you are at the time.
There is a "blank space" symbol between the "~"
symbol and the "!" symbol, as shown below.
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}~ !
"#$%&'()*+,-./0123456789:;<=>?@
NOTE: To shorten a name or "erase" unwanted
characters, override them with a "blank space"
character.
6. When you are satisfied with the new name of the
event, press the
& Close, then press
procedure. The display returns to the programming
screen, and automatically exits programming mode
in about 30 seconds if there's no activity.
Copyright © 2006 Intermatic, Inc.
>Rename Event >Rename Event
My Events My Events
. The
>Rename Event >Rename Event
arrows to select the first
<UP/DOWN>
button to highlight Save
<ENTER>
again to complete the
<ENTER>
Event 1 Event 1
Event 2 Event 2
Enter Event Name Enter Event Name
Event 1 Event 1
Save & Close Save & Close
<RIGHT>
11:25a 11:25a
11:25a 11:25a