Intermatic InTouch CA5500R User Manual page 59

Step-by-Step with the In-Wall Master Controller
1. Press
<ENTER>
displays the Main Menu.
2. Scroll with the
arrows to select My
Scenes, then press
. The screen
<ENTER>
displays a list of options for working with scenes.
Select Rename Scene,
3.
then press
<ENTER>
screen displays a list of
the scenes programmed
in your system.
4. Select the scene you
want to rename and press
. The first letter of
<ENTER>
the existing scene name
is highlighted.
5. Scroll with the
character of the new name, then press the
arrow to select the second character, and continue
creating the new name.
The characters repeat in a loop in the order shown
below, starting from wherever you are at the time.
There is a "blank space" symbol between the "~"
symbol and the "!" symbol, as shown below.
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}~ !
"#$%&'()*+,-./0123456789:;<=>?@
NOTE: To shorten a name or "erase" unwanted
characters, override them with a "blank space"
character.
6. When you are satisfied with the new name of the
scene, press the
& Close, then press
renaming procedure. The display returns to the Main
Providing a brighter solution.™
. The screen
Setup Setup
<UP/DOWN>
My Scenes My Scenes
>Rename Scene >Rename Scene
. The
>Rename Scene >Rename Scene
arrows to change the first
<UP/DOWN>
button to highlight Save
<ENTER>
<ENTER>
My Scenes My Scenes
My Events My Events
Turn on Scene Turn on Scene
Configure Scene Configure Scene
Add Scene Add Scene
Rename Scene Rename Scene
My Scenes My Scenes
Scene 1 Scene 1
Enter Scene Name Enter Scene Name
Scene 10 Scene 10
<RIGHT>
again to finish the

11:25a 11:25a
11:25a 11:25a
11:25a 11:25a
Save & Close Save & Close
11:25a 11:25a