Intermatic InTouch CA5500R User Manual page 63

Step-by-Step with the In-Wall Master Controller
Select Add Event, then
3.
press
<ENTER>
displays the new scene,
giving it a generic name
like "Event 1" and highlighting the first letter in the
event name ("E" in "Event 1").
OPTION: You can rename the event to something
that's more descriptive. If this is the ON setting for
outside lights, you might name it "Outside On."
• To rename the event at this time, follow
instructions below.
• To skip renaming at this time, press
screen highlights Configure. Continue at Step 6.
4. Scroll with the
character of the new name, then with the
arrow to select the second character, and continue.
The characters repeat in a loop in the order shown
below, starting from wherever you are at the time.
There is a "blank space" symbol between the "~"
symbol and the "!" symbol, as shown below.
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}~ !
"#$%&'()*+,-./0123456789:;<=>?@
NOTE: To shorten a name or "erase" unwanted
characters, override them with a "blank space"
character.
5. When you are satisfied with the new name of
the event, press the
Configure.
Providing a brighter solution.™
>Add Event >Add Event
. The screen
arrows to select the first
<UP/DOWN>
<ENTER>
Enter Event Name: Enter Event Name:
Event 1 Event 1
E E
<ENTER>
<RIGHT>
button to highlight

Configure> Configure>
11:25a 11:25a
. The