Working With Scenes; Adding A Scene - Intermatic InTouch CA5500R User Manual


InTouch™ User Guide

Working with Scenes

Select Delete Room and
6.
press
<ENTER>
displays the room and
asks if you want to Save
& Close.
7. Select Yes with the
. The room is deleted and the display returns
<ENTER>
to the Main Menu screen, and automatically exits
programming mode in about 30 seconds if there's no
activity.
NOTE: Any devices that were assigned to the room
being deleted will show up in the "Unassigned"
folder.
Overview
A scene is a group of devices that have been set to
respond the way you want. For example, if you set
up the lighting in your living room a certain way for
watching a movie on your big screen TV, you've created
a scene. Another scene might be to turn on all the lights
on your stairway and upstairs hallway. Or your porch
light, the lights in your yard, and the light at the end of
your driveway.

Adding a Scene

Adding a scene means to create a new scene by
grouping devices you want to control. This is the time-
saving way of creating scenes where you can work
from the In-Wall Master Controller instead of walking
throughout the house.
During programming, use the
navigate to your selections on the screen. Use the
arrow to advance to the next item.
<RIGHT>
NOTE: If you pause for more than 30 seconds during
the programming procedure, the In-Wall Master
Controller will time out and exit programming mode.
Copyright © 2006 Intermatic, Inc.
Setup>Setup Home>Edit Rooms Setup>Setup Home>Edit Rooms
. The screen
<RIGHT/LEFT>
<ARROW>
Remove Bathroom 1 Remove Bathroom 1
Save & Close Save & Close
No No Yes Yes
arrows, then press
buttons to
11:25a 11:25a