Removing A Device From A Room - Intermatic InTouch CA5500R User Manual

Step-by-Step with the In-Wall Master Controller
Select Edit Rooms, then
4.
press
<ENTER>
displays the list of the
rooms you have created
for the house.
5. Select the first room you
want to edit and press
. The screen
<ENTER>
displays the options for
editing the room.
6. Select Add Device, then
press
<ENTER>
displays the room name
by itself.
7. Press
<ENTER>
room.
7. Now go around the room and change the state of
each device you want to include in the room: turn
it ON, turn it OFF, etc. If any controllers are to be
included in the room, press any
button.
8. When you are finished, press
the procedure. The display returns to the Main Menu,
and automatically exits programming mode in about
30 seconds if there's no activity.
9. Repeat this procedure for the other rooms in the house.

Removing a Device from a Room

If you want to reclassify a device from one room to
another:
• Use the following procedure to "remove" the device
from one room.
• Use the procedure on page 46 to "add" the device to
a new room.
During programming, use the
navigate to your selections on the screen. Use the
arrow to advance to the next item.
<RIGHT>
Providing a brighter solution.™
Setup>Setup Home>Edit Rooms Setup>Setup Home>Edit Rooms
. The screen
Setup>Setup Home>Edit Rooms Setup>Setup Home>Edit Rooms
Add Device Add Device
Remove Device Remove Device
Rename Room Rename Room
Delete Room Delete Room
Setup>Setup Home>Edit Rooms Setup>Setup Home>Edit Rooms
. The screen Bathroom 1 Bathroom 1
to begin adding devices to the selected
<ARROW>
My Rooms My Rooms
Bathroom 1 Bathroom 1
Bedroom 1 Bedroom 1
Bedroom 2 Bedroom 2
<SCENE SELECTION>
to complete
<ENTER>
buttons to

11:25a 11:25a
11:25a 11:25a
11:25a 11:25a