Deleting A Room - Intermatic InTouch CA5500R User Manual

Step-by-Step with the In-Wall Master Controller

Deleting a Room

Deleting a room lets you correct your original
configuration. When you delete a room, any devices
assigned to the room are returned to the "Unassigned"
room.
During programming, use the
navigate to your selections on the screen. Use the
arrow to advance to the next item.
<RIGHT>
NOTE: If you pause for more than 30 seconds during
the programming procedure, the In-Wall Master
Controller will time out and
exit programming mode.
Begin at the InTouch Home
Screen as shown.
1. Press
<ENTER>
displays the Main Menu.
2. Scroll with the
arrows to select Setup,
then press
<ENTER>
screen displays system
setup options.
Select Setup Home, then
3.
press
<ENTER>
displays options for
setting up the home.
4. Select Edit Rooms, then
press
<ENTER>
displays the list of the
rooms you have created
for the house.
5. Select the room you
want to delete and press
. The screen
<ENTER>
displays the options for
editing the room.
Providing a brighter solution.™
<ARROW>
. The screen
Setup Setup
<UP/DOWN>
Setup Setup
. The
Setup>Setup Home Setup>Setup Home
. The screen
Setup>Setup Home>Edit Rooms Setup>Setup Home>Edit Rooms
. The screen
Setup>Setup Home>Edit Rooms Setup>Setup Home>Edit Rooms
buttons to
11:25 11:25
TM TM
WIRELESS CONTROLS WIRELESS CONTROLS
My Scenes My Scenes
My Events My Events
Setup Home Setup Home
Set Time Set Time
Setup Network Setup Network
Add Rooms Add Rooms
Edit Rooms Edit Rooms
My Rooms My Rooms
Bathroom 1 Bathroom 1
Bedroom 1 Bedroom 1
Bedroom 2 Bedroom 2
Add Device Add Device
Remove Device Remove Device
Rename Room Rename Room
Delete Room Delete Room
1
a a
11:25a 11:25a
11:25a 11:25a
11:25a 11:25a
11:25a 11:25a
11:25a 11:25a