Renaming An Event - Intermatic InTouch CA5500R User Manual

Step-by-Step with the In-Wall Master Controller
NOTE: If you scroll below one minute, the screen
displays Manual Off. This means the event will turn
something on, but you will have to manually turn it
off.
6. Press the
<LEFT>
depending on the duration you want to set (up to 24
hours).
7. Scroll with the
correct Hour.
8. Press the
<RIGHT>
then scroll
<UP/DOWN>
9. You are now finished.
Press the
<RIGHT>
to select Next, then press
.
<ENTER>
• Continue at page 65, Step 12 for a Time Event.
• Continue at page 74, Step 12 for an Action Event.

Renaming an Event

During programming, use the
navigate to your selections on the screen. Use the
arrow to advance to the next item.
<RIGHT>
NOTE: If you pause for more than 30 seconds during
the programming procedure, the In-Wall Master
Controller will time out and
exit programming mode.
Begin at the InTouch Home
Screen as shown.
1. Press
<ENTER>
displays the Main Menu.
2. Scroll with the
arrows to select
DOWN>
My Events, then press
. The screen
<ENTER>
displays options for working with events.
Providing a brighter solution.™
arrow to select the hour or minutes,
arrow buttons to set the
<UP/DOWN>
arrow to select the Minutes field,
to set the correct minutes.
> Configure Event > Configure Event
Event 1 Event 1
arrow
<ARROW>
. The screen
Setup Setup
<UP/
My Events My Events
What begins this Event? What begins this Event?
Time Time Action Action
buttons to
11:25 11:25
TM TM
WIRELESS CONTROLS WIRELESS CONTROLS
My Scenes My Scenes
My Events My Events
Add Event Add Event
Configure Event Configure Event
Rename Event Rename Event
Delete Event Delete Event

11:25a 11:25a
a a
11:25a 11:25a
11:25a 11:25a