Setting The Off Time - Intermatic InTouch CA5500R User Manual


InTouch™ User Guide
17. If you are selecting a specific time, scroll with the
<UP/DOWN>
18. Press the
<RIGHT>
then scroll
<UP/DOWN>
19. When finished setting
start time, press the
arrow to advance
<RIGHT>
to the right past Sunset.
The screen displays the option of whether you want
the event to start at a Random time or exact time.
NOTE: If you select Random, the event will occur
within a 30-minute window around the time you
have selected. This is a security feature. If you are
on vacation, choosing Random will make sure your
lights don't always come on at the same time, giving
your house a "lived in" look.
20. Scroll with the
Random feature ON or OFF.
21. You are now finished. Press the
select Done, then press
to the Main Menu screen, and automatically exits
programming mode in about 30 seconds if there's no
activity.
NOTE: A Scene representing the event will be
selected in the scene list and can be edited. This
scene should not be removed unless the associated
event will also be removed.

Setting the OFF Time

You have created the ON time for the event, and must
now go back and create the OFF time for the event. The
procedure is exactly the same. Just keep the following in
mind:
• When creating the OFF event, select the same scenes
to be activated (turned off) that you have set in the
ON event. See Steps 7 and 8.
• When setting devices, you probably now want the
event to turn them OFF. See Step 9.
Copyright © 2006 Intermatic, Inc.
arrows to set the correct Hour.
arrow to select the Minutes field,
to set the correct minutes.
<UP/DOWN>
<ENTER>
>Configure Event>Time >Configure Event>Time
Event 1 Event 1
Random: Random:
Off Off
arrows to turn the
arrow to
<RIGHT>
. The display returns
Done> Done>
11:25a 11:25a