Grouping Devices Into Rooms - Intermatic InTouch CA5500R User Manual


InTouch™ User Guide

Grouping Devices into Rooms

• To set exact time, scroll with the
arrows to set today's sunrise time, then press the
<RIGHT>
• To skip setting exact time, press the
to bypass the step.
In either case, the screen displays a computed time
for sunset, as shown.
14. Recommended: As with sunrise, you can enter the
exact time for sunset. Scroll with the
arrows to set the exact sunset time, then press the
arrow, or press the
<RIGHT>
the step. In either case, the cursor highlights Save &
Close.
15. Press
<ENTER>
Menu screen reappears. After a few seconds, the
Home Screen reappears, displaying the correct time.
Overview
A room is a group of devices that:
• Have been installed inside a room of the house, or
• Will be controlled by scenes programmed for a room
of the house, both inside and outside the room.
In this case, for example, you might also include
a hallway light located outside the room along
with the devices inside the room since you plan to
program scenes that will control the hallway light as
well.
To group devices into rooms, you must first add devices
to the network (see page 14), create the rooms, and
then add the appropriate devices to the rooms you have
created.
Copyright © 2006 Intermatic, Inc.
arrow.
. Your settings are saved and the Main
<UP/DOWN>
<RIGHT>
<UP/DOWN>
arrow to bypass
<RIGHT>
arrow