Hardware Overview - Intermatic InTouch CA5500R User Manual

Hardware Overview

The Hand-Held and Base are the most important parts of
an InTouch network.
The STATUS LIGHT The STATUS LIGHT
<EXCLUDE> <EXCLUDE>
button button
(on left side) (on left side)
The The
<ENTER> <ENTER>
button button
Press to Press to
<RAISE> <RAISE>
levels levels
The The
POWER LIGHT POWER LIGHT
Status Light — provides important feedback and
confirmation when programming the network.
The <Include> and <Exclude> Buttons
the side or edge of the Hand-Held, are used during
programming to add or remove devices as part of the
InTouch network.
<Scene Selection> Buttons
has been programmed into the network for activation.
The <Enter> Button
programmed into the network.
The <Raise> and <Lower> Buttons
lower levels of devices (e.g., dimmer switches) that are
part of selected scenes.
The <Home Button>
guide.
The Power Light
pulses blue when charging the Hand-Held, lights solid
blue when the Hand-Held is fully charged, lights dim
blue when the Hand-Held is not in the Base, and blinks
red when the Hand-Held cannot be charged.
Providing a brighter solution.™
(on right side) (on right side)
<SCENE SELECTION> <SCENE SELECTION>
— used to select a scene that
— used to activate a scene that is
— has special uses explained in this
— tells the power status of the Base: it
Setting Up Your Network
<INCLUDE> <INCLUDE>
button button
buttons buttons
Press to Press to
<LOWER> <LOWER>
levels levels
The <HOME> button The <HOME> button
has special uses has special uses
explained in explained in
this guide this guide
— located on
— used to raise and