Setting Up A Recurring Event Of Specific Duration - Intermatic InTouch CA5500R User Manual

.
Step-by-Step with the In-Wall Master Controller
• Be sure your OFF event includes the same days as
the ON event. See Step 14.
• Another idea: You can use the duration setting as
a way to build in an OFF without having to create
another event. You can set a length of time for the
event to stay ON of up to 24 hours. See page 76.
That's it. You can set as many ON/OFF pairs as you
want, activating one or more of the scenes in the
network.
Setting Up a Recurring Event of
Specific Duration
Another kind of Recurring Event turns a scene ON at a
specific time, on a repeating basis, and then turns OFF
after the set duration for the event (up to 24 hours) runs
out.
During programming, use the
navigate to your selections on the screen. Use the
arrow to advance to the next item.
<RIGHT>
NOTE: If you pause for more than 30 seconds during
the programming procedure, the In-Wall Master
Controller will time out and exit programming mode.
Begin at the InTouch Home
Screen as shown.
1. Press
<ENTER>
displays the Main Menu.
2. Scroll with the
arrows to select
DOWN>
My Events, then press
. The screen
<ENTER>
displays options for working with events.
Providing a brighter solution.™
<ARROW>
. The screen
Setup Setup
<UP/
My Events My Events
buttons to
11:25 11:25
TM TM
WIRELESS CONTROLS WIRELESS CONTROLS
My Scenes My Scenes
My Events My Events
Add Event Add Event
Configure Event Configure Event
Rename Event Rename Event
Delete Event Delete Event

a a
11:25a 11:25a
11:25a 11:25a