Other Event Programming; Setting The Duration Of An Event - Intermatic InTouch CA5500R User Manual


InTouch™ User Guide

Other Event Programming

Setting the Duration of an Event

This procedure lets you set the length of time an event
will last.
During programming, use the
navigate to your selections on the screen. Use the
arrow to advance to the next item.
<RIGHT>
NOTE: If you pause for more than 30 seconds during
the programming procedure, the In-Wall Master
Controller will time out and exit programming mode.
Begin at the InTouch Home
Screen as shown.
1. Press
<ENTER>
displays the Main Menu.
2. Scroll with the
arrows to select
DOWN>
My Events, then press
. The screen
<ENTER>
displays event options.
3. Select Configure Event,
then press
<ENTER>
screen displays the list of
stored events.
4. Scroll with the
arrows to select
DOWN>
the event you want to
configure, then press
. The screen displays options for activating
<ENTER>
the event.
Select Event Duration,
5.
then press
<ENTER>
screen specifies that you
set the duration time for
the event.
Copyright © 2006 Intermatic, Inc.
<ARROW>
. The screen
Setup Setup
<UP/
. The
<UP/
>Configure Event >Configure Event
Event 1 Event 1
Event Scene Event Scene
Time/Action Time/Action
Event duration Event duration
>Configure Event >Configure Event
Event 1 Event 1
. The
buttons to
11:25 11:25
TM TM
WIRELESS CONTROLS WIRELESS CONTROLS
My Scenes My Scenes
My Events My Events
My Events My Events
Add Event Add Event
Configure Event Configure Event
Rename Event Rename Event
Delete Event Delete Event
>Configure Event >Configure Event
My Events My Events
Event 1 Event 1
Event 2 Event 2
What is the event duration? What is the event duration?
Manual Off Manual Off
a a
11:25a 11:25a
11:25a 11:25a
11:25a 11:25a
11:25a 11:25a
Next> Next> Next> Next>
11:25a 11:25a