Intermatic InTouch CA5500R User Manual page 57

Step-by-Step with the In-Wall Master Controller
NOTE: If you pause for more than 30 seconds during
the programming procedure, the In-Wall Master
Controller will time out and
exit programming mode.
Begin at the InTouch Home
Screen as shown.
1. Press
<ENTER>
displays the Main Menu.
2. Scroll with the
arrows to select
DOWN>
My Scenes, then press
. The screen
<ENTER>
displays a list of options for working with scenes.
3. Select Configure Scene,
then press
<ENTER>
screen displays a list of
the scenes programmed
in your system.
4. Scroll with the
scene you want to control with a scene button.
5. Press and hold (for 4+ seconds) the
SELECTION>
6. Press the
<HOME>
for the device to exit programming mode and return
to the Home screen.
7. Test the programming. Press the
button once to select the scene, then press the
button to activate the scene. Press
<ENTER>
again to deactivate.
NOTE: If all of the devices in the scene are on, the
<SCENE SELECTION>
Providing a brighter solution.™
. The screen
<UP/
. The
<UP/DOWN>
button you want to control the scene.
button or wait for 30 seconds or so
button will be brightly lit.
11:25 11:25
TM TM
WIRELESS CONTROLS WIRELESS CONTROLS
My Scenes My Scenes
My Events My Events
Setup Setup
My Scenes My Scenes
Turn on Scene Turn on Scene
Configure Scene Configure Scene
Add Scene Add Scene
Rename Scene Rename Scene
>Configure Scene >Configure Scene
My Scenes My Scenes
Scene 1 Scene 1
Scene1 Scene1
arrows to select the the
<SCENE
<SCENE SELECTION>

a a
11:25a 11:25a
11:25a 11:25a
11:25a 11:25a
<ENTER>