Intermatic InTouch CA5500R User Manual page 18

1
InTouch™ User Guide
• If the device is the In-
Wall Master Controller,
use the
<ARROW>
to navigate through the
following routine.
Begin at the InTouch
Home Screen as
shown.
a. Press the
button. The screen
displays the Main
Menu as shown.
a. Scroll with the
arrows to
DOWN>
select Setup, then
press
<ENTER>
screen displays system setup options.
a. Select Setup
Network, then
press
<ENTER>
screen displays
options for setting up the network.
b. Select Replicate Receive, then press
The screen will display as follows:
• "Waiting for routing table update..." when
the Replicate Receive command has been
received and
• "Loading routing table..." when the Master
Controller is communicating with the
Base/Hand-Held.
• "Routing table updated" if the update was
successful.
• "Routing table update failed" if the
update was not successful. Refer to the
Copyright © 2006 Intermatic, Inc.
buttons
WIRELESS CONTROLS WIRELESS CONTROLS
<ENTER>
My Scenes My Scenes
My Events My Events
Setup Setup
<UP/
Setup Setup
Setup Home Setup Home
Set Time Set Time
Setup Network Setup Network
. The
Setup>Setup Network Setup>Setup Network
Include Node Include Node
Exclude Node Exclude Node
Replicate Receive Replicate Receive
Reset Controller Reset Controller
. The
<ENTER>
11:25 11:25
TM TM
<ENTER>
is pressed.
a a
11:25a 11:25a
11:25a 11:25a
11:25a 11:25a
.