Creating The Network; Linking The Hand-Held To The Base - Intermatic InTouch CA5500R User Manual

Creating the Network

Use this procedure to create the network of your
InTouch devices.
If you "include" ALL the devices in your network before
you create scenes, your network will operate smoother,
more responsively, and with maximum efficiency.
You need the Hand-Held (Model CA5500R) with Base
(Model CA5500B) to complete this procedure.
NOTE: For maximum network performance, locate
the Base in a central area of the house.

Linking the Hand-Held to the Base

Your InTouch network consists of the private
connections between your Hand-Held, its Base (which
is actually the "brains" of the system as well as the
charger for the Hand-Held), and all of the devices your
network controls.
Before linking to devices throughout the house, you
must link the Hand-Held to its Base. If you have more
than one Hand-Held, you must link each of them to
their respective bases. This makes sure that only your
Hand-Held(s) will be able to control the devices in
your network. If neighbors have InTouch systems, their
controllers will not be able to affect your network.
Providing a brighter solution.™
Setting Up Your Network
11