Table of Contents
Advertisement
S5-95F
Introduction
Please read the introduction carefully. You will then find it easier to use the manual and this will save
time.
The S5-95F is a failsafe programmable controller for the lower and mid performance ranges. It is for
use wherever safety is the first priority and where potential dangers must be avoided. In order to use
the controller to its best advantage you require detailed information.
In this manual we have attempted to present the necessary information as completely and as well
organized as possible. Certain information is repeated in various chapters so that you do not have to
leaf through the manual to find what you need.
On the following pages of this introduction you will find information that will make it easier for you to
use the manual. This section explains how the manual is organized.
Contents
•
Hardware Description (Chapters 1, 2, 3)
These chapters describe the controller: how it fits into the SIMATIC S5 family of programmable
controllers, how it functions, and how you install and connect it.
•
Startup Information (Chapters 4, 5, 6)
These chapters summarize the information you need to start up your programmable controller.
•
The Programming Language and Blocks for the S5-95F (Chapters 7, 8, 9)
These chapters describe the structure, operations, and structuring aids of the STEP 5 pro-
gramming language and the function of the integral blocks.
•
Functions of the S5-95F (Chapters 10, 11, 12, 13)
Each of these chapters contains a complete description of a particular function, from wiring to
programming (subjects include: integral clock, analog value processing, interrupt processing,
SINEC L1).
•
Diagnostics and Troubleshooting (Chapters 14, 15)
These chapters describe the diagnostics and test means available to remedy hardware and
software faults.
•
Information for First Users (Chapters 16, 17)
These chapters give users of the S5-95U a brief overview of the major differences between the
S5-95U and S5-95F. An additional example shows you how easy it is to configure, program and
test the S5-95F programmable controller.
•
Rules for Failsafe Applications (Chapter 18)
This chapter is a brief repetition of the above topics. It is also intended to serve as a reference
and to simplify system acceptance.
EWA 4NEB 812 6210-02
Introduction
xvii
Advertisement
Table of Contents
