Guidelines for Handling Electrostatic Sensitive Devices (ESD)
Electrostatic charging of objects and persons
Every object with no conductive connection to the electrical potential of its surroundings can be
charged electrostatically. In this way, voltages up to 15000 V can build up whereas minor charges,
i.e. up to 100 V, are not relevant.
Examples:
•
Plastic covers
•
Plastic cups
•
Plastic-bound books and notebooks
•
Desoldering device with plastic parts
•
Walking on plastic flooring
•
Sitting on a padded chair
•
Walking on a carpet (synthetic)
Limits for perceiving electrostatic discharges
An electrostatic discharge is
•
perceptible from 3500 V
•
audible from 4500 V
•
visible from 5000 V
A fraction of these voltages is capable of destroying or damaging electronic devices.
Carefully note and apply the protective measures described below to protect and prolong the life of
your modules and components.
General protective measures against electrostatic discharge damage
•
Keep plastics away from sensitive devices. Most plastic materials have a tendency to build up
electrostatic charges easily.
•
Make sure that the personnel, working surfaces and packaging are sufficiently grounded when
handling electrostatic sensitive devices.
•
If possible, avoid any contact with electrostatic sensitive devices. Hold modules without touching
the pins of components or printed conductors. In this way, the discharged energy cannot affect
the sensitive devices.
D-2
up to
5000 V
up to
5000 V
up to
8000 V
up to
8000 V
up to 12000 V
up to 15000 V
up to 15000 V
S5-95F
EWA 4NEB 812 6210-02