Table of Contents
Advertisement
RUGGEDCOM WIN5123
Installation Guide
Introduction
The RUGGEDCOM WIN5123 Outdoor Unit (ODU) Customer Premises Equipment (CPE) device is part of the
RUGGEDCOM WIN family, a line of mobile WiMAX broadband wireless access systems based on the IEEE
802.16e mobile WiMAX standard.
The RUGGEDCOM WIN5123 is a high-performance, self-learning subscriber. It automatically detects the base
station on the best signal available allowing for plug and play installation and maintenance free operation. The
automatic switching and monitoring features guarantee on-going operation in changing conditions, which results
in low maintenance and considerable operating expense savings.
The device is compliant to the IEEE 802.16e standards to effectively meet the unique requirements of the
wireless Metropolitan Area Network (MAN) environment and to deliver broadband access services to a wide
range of customers. Specifically designed for point-to-multipoint broadband wireless access applications,
the RUGGEDCOM WIN5123 provides efficient use of the wireless spectrum, supporting a range of user
environments.
The RUGGEDCOM WIN5123 Outdoor Unit (ODU) Customer Premises Equipment (CPE) device also complies
with the IEEE 802.16-2005 standard for the deployment of point-to-multipoint (PMP) and point-to-point (PTP)
network architectures.
The device is a WiMAX Forum IEEE 802.16e Wave 2 (MIMO) certified subscriber. Each subscriber registers and
establishes a bi-directional data link with the base station.
NOTE
This device complies with Industry Canada license-exempt RSS standard. Operation is subject to the
following two conditions:
• this device may not cause interference, and
• this device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
• l'appareil ne doit pas produire de brouillage, et
• l'utilisateur de l'appareil doit accepter tout brouillage radio électrique subi, meme si le brouillage est
susceptible d'en compromettre le fonctionnement.
The following sections provide more information about the device:
•
Section 1.1, "Feature Highlights"
•
Section 1.2, "Configuration Ports and Indicator LEDs"
•
Section 1.3, "Antennas"
Chapter 1
Introduction
1
Advertisement
Table of Contents
