Vga Control Bar - Roland VS-2400CD Owner's Manual

30—VGA Main Display Universal Elements

VGA Control Bar

The VGA main display's control bar provides a wide assortment of important tools.
1.
11.
1. VARI PITCH Indicator
When the VARI PITCH parameter is turned on, the VARI PITCH
indicator lights.
2. Write-Protect Indicator
When the current project is write-protected, the Write-Protect indicator
lights.
3. Current Time Location Display
The Current Time Location display shows the current position of the
now line in time code—hours/minutes/seconds/frames/subframes—
and in measures, beats and ticks. It also shows the most recent marker
and the marker's name or—if it hasn't been named—its time location.
You can navigate a project using the Current Time Location display, as described on
Page 122.
4. Mastering Controls
Click MASTERING ROOM to turn the Mastering Room on or off. When
it's on, click Master Tracks Record to start recording mastering tracks.
392
2.
12. 13. 14.
1. VARI PITCH indicator
2. Write-protect indicator
3. Current Time Location display
4. Mastering Controls
5. Automix controls
6. UNDO/REDO
7. EXT SYNC
8. Metronome
9. A.PUNCH
10. LOOP
11. ABS/REL Indicator
Time code location
MASTERING ROOM
www.RolandUS.com
3.
7.
15.
Measures, beats and tick location
Most recent marker
Master Tracks Record
4. 5. 6.
8. 9. 10.
16. 17. 19. 21.
18. 20.
12. SCRUB
13. PREVIEW buttons
14. Position bar
15. Transport buttons
16. PREVIOUS/NEXT
17. MARKER
18. TAP
19. LOCATOR (LOC)
20. SCENE (SCN
21. Scene name/number
22. Project information
Marker name/location
Roland VS-2400CD Owner's Manual
22.
176
95
122
335