Take Mngr - Roland VS-2400CD Owner's Manual

•

Take Mngr

Use: TRACK menu
The Take Mngr ("Take Manager") shows you all of the project's takes
currently on your hard drive.
A black box to
that it's used by
a phrase in the
If you're not sure what a take is, see Page 84.
You can do a variety of things with the takes you see in the Take Manager screen—use
the
•
•
•
•
When you delete a take, it's permanently erased from your hard drive. Use this feature
cautiously. It cannot be undone.
•
•
Roland VS-2400CD Owner's Manual
Phrase
Level
5-second phrase
If the FADE OUT TIME is longer than the phrase—it's automatically shortened to equal
the actual length of the phrase.
0 sec
Phrase
Level
5-second phrase
the left of a
take means
project.
and buttons or the Time/Value dial to scroll through the list. Press:
F1 (NAME)—to rename the selected take in order to make it easier to identify. For
more on naming, see Page 71.
F2 (INFO)—to toggle the information shown for the takes. The Take Manager can
show each take's size and session information, or its start and end time.
F3 (SORT)—to switch among the list's available sorting orders. You can select:
• Hist—to sort the list by recording date and time.
• V.Tr—to sort the list in V-Track order.
• Name—to sort the list alphabetically by name.
F4 (DELETE)—to delete the currently selected take.
F5 (Previw)—to listen to the selected take. Press EXIT/NO to halt playback.
F6 (EXIT)—to return to the TRACK PHRASE EDIT MENU.
If the fade-in and fadeout are
both set to three seconds, the
fadeout lasts for its full three
seconds and the fade-in is
shortened to the remaining
two seconds.
5 sec 7-second fade length
If the fadeout is seven
seconds long, but the phrase
only lasts five seconds, the
fadeout acts as if it's set to run
the full length of the phrase.
www.RolandUS.com
19—Phrase Editing Operations
TRACK menu
F1 (TAKE)
The numbers and
letters to the right of
a take's name are its
hexadecimal file
identification.
259