Setting Up Pre Or Post Track Direct Outputs - Roland VS-2400CD Owner's Manual

Setting Up Pre or Post Track Direct Outputs

1. At the bottom right of the OUTPUT ASSIGN screen—see the previous
2. Turn the Time/Value dial to select:
Roland VS-2400CD Owner's Manual
illustration—select the TRACK DIRECT SOURCE.
• PreFader—so that track signals are sent to outputs unaffected by the positions of
their track channel faders.
• PostFader—so that the tracks' track channel faders control their output levels.
21—Working with the VS-2400CD 0utputs
www.RolandUS.com 275