34-Vga Main Display Ez Routing Screen; Making Connections; Routing On The Vga Using A Mouse - Roland VS-2400CD Owner's Manual

34—VGA Main Display EZ ROUTING Screen
The VGA main display displays all four of the VS-2400CD's EZ ROUTING screens at the
same time to make all of your routing simple to perform.
PATCH
TRACK
ASSIGN
To display the EZ ROUTING screens, press EZ ROUTING on the VS-2400CD or select
ROUTING VIEW from the EZ ROUTING menu (Page 390).
On the VGA main display, the VS-2400CD's top-panel analog inputs and rear-panel
inputs and outputs look just like their physical counterparts on the VS-2400CD itself,
making it easy to visualize the input and output connections you're making.
The F buttons beneath the EZ ROUTING screen are the same as those found on the
VS-2400CD's internal LCD EZ ROUTING screens.
The LOAD and SAVE features behave as described in Chapter 22.

Making Connections

Routing on the VGA operates on the same principles as routing on the VS-2400CD's
internal LCD. To learn about routing, see Page 227.
You can route signals on the VGA by:
•
•

Routing on the VGA Using a Mouse

To perform routing your mouse, position the mouse cursor over the desired
connection point until it turns into a pointing finger and then drag your mouse
to the desired destination.
Roland VS-2400CD Owner's Manual
BAY
pane
pane
selecting the desired connection node with the
the Time/Value dial to make the desired connection.
dragging the desired connections into place using your mouse.
, , or
www.RolandUS.com
OUTPUT
ASSIGN
pane
LOOP
EFFECT
ASSIGN
pane
buttons and turning
437