1. EQ On/Off Button
Turn the channel EQ on or off by clicking this button—when it's blue,
the EQ is on.
2. RESET Button
Click RESET to return the EQ parameters to their factory default settings.
3. Interactive EQ Display
Draw the desired EQ curve by clicking and dragging on any of the red triangles to set
the corresponding EQ band.
4. EQ Meters
The EQ meters show the level the signal as it comes into the channel EQ and as it leaves
it.
EQ Parameters
The CH VIEW EQ parameters are described starting on Page 145.
EFFECT INSERT Controls
Each input and track channel CH VIEW screen contains an EFFECT INSERT matrix in
which you can insert an available effect processor—or the left or right side of a
processor—into the channel's signal flow. The insert effect matrix shows each effect
inserted on the channel, as well as the signal flowing from one insert effect to the next.
The number of each processor's currently selected patch is shown in the matrix as well.
To insert an effect on a channel, click the desired processor
button repeatedly to select the type of insert routing you
want to use. To learn how each of the available routings
works, see Page 211.
If a processor is already inserted elsewhere, its
processor button displays where it's being used.
Roland VS-2400CD Owner's Manual
Processor
buttons
Insert effect matrix
32—VGA Main Display CH VIEW Screens
Each available effect processor has its own
processor button—in this illustration, only
one VS8F-2 effect expansion board is
installed, so Effects 3 and 4 aren't
available.
www.RolandUS.com
Ins
InsL
InsR
InsS
This effect processor's
already being used by
Track Channel 1.
419