1. Manuals
  2. Brands
  3. Roland Manuals
  4. Musical Instrument
  5. VS-2000
  6. Owner's manual addendum

Roland VS-2000 Owner's Manual Addendum

Digital studio workstation
Hide thumbs Also See for VS-2000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual

Advertisement

Table of Contents
loading

Related Manuals for Roland VS-2000

Summary of Contents for Roland VS-2000

  • Page 3: Table Of Contents

    Importing rhythm patterns from SMF ... 10 Backing Up and Recovering a project via USB ... 11 Data structure of the VS-2000’s internal hard disk ... 11 Backing up a project on your computer ... 13 Recovering a backed-up project from your computer ... 14 Backing up and Recovering User Rhythm Arranges or Rhythm Patterns ...
  • Page 4 Track/V-Track Info ... 63 Dynamics and EQ Controls ... 63 EFFECT INSERT Controls ... 66 FX Return Channel CH VIEW Elements ... 67 LOOP FX ASSIGN ... 67 Effect Algorithm Display ... 67 www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum...
  • Page 5 Routing on the VGA Using a Mouse ... 77 Recording Bus Attenuation ... 78 9—VGA Main Display Automix Editing Editing Automix Data on the VGA ... 79 Targeting Automix Tracks and Data for Editing ... 80 Index Roland VS-2000 Owner’s Manual, Version Two Addendum www.RolandUS.com...
  • Page 6 Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 7: 1-Welcome To Version Two

    You’ll often be able to, for example, use a button by pressing it on the VS-2000 or by clicking it with your mouse on the VGA or the VS-2000’s LCD. You could also set a level by moving a channel strip fader or by dragging your mouse.

  • Page 8: To Get The Most From Version Two

    To learn about connecting, setting up and configuring a VGA display and/or ASCII keyboard, see Pages 64 and 66 of the VS-2000 Owner’s Manual. If you’d prefer to use your VS-2000 without a VGA display, make sure that the UTILITY menu’s OPERATION TARGET parameter is set to LCD. See “Setting the Operation Target”...

  • Page 9: 2-Version Two Enhancements

    2—Version Two Enhancements This chapter describes Version Two enhancements that add new features to the VS-2000. These new features can be used from the VS-2000 LCD or a VGA display. Chapter 3 describes choosing the display on which you want to work.

  • Page 10: Importing Rhythm Patterns From Smf

    8. Press F5 (OK) to import the SMF into the current rhythm pattern. 9. When SMF import is completed, the Rhythm Pattern Setup screen appears. www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum To return to the SMF IMPORT screen, press F1 <<BACK).

  • Page 11: Backing Up And Recovering A Project Via Usb

    Data structure of the VS-2000’s internal hard disk VS-2000 icons When USB Storage mode starts up and the internal hard disk of the VS-2000 has been detected by your computer, one or more “VS-2000 icons” will appear. Each VS-2000 corresponds to a partition. Up to four partitions (IDE:0–IDE:3) will be detected in order of the partition number.
  • Page 12 2—Version Two Enhancements VS-2000 internal hard disk data structure When you click a VS-2000 icon, the files and folders of the VS-2000’s internal hard disk (partition) will be displayed on your computer. These files and folders are organized as follows.

  • Page 13: Backing Up A Project On Your Computer

    (Owner’s Manual Page 82). After a time, your computer will detect the VS-2000’s internal hard disk. 2. As described in “VS-2000 icons” on Page 11, double-click the VS-2000 icon for the partition that contains the project you want to back up. The files and folders on the VS-2000’s internal hard disk will be displayed.

  • Page 14: Recovering A Backed-Up Project From Your Computer

    1. Start up USB Storage Mode as described in “Establishing a connection to your computer” (Owner’s Manual Page 82). 2. As described in “VS-2000 icons” on Page 11, double-click the “VS-2000 icon” for the recovery-destination partition (i.e., the partition to which you will be recovering the project).

  • Page 15: Added Parameters And Shortcuts

    field selects the output jack(s) and a digital connector from which the metronome sound will be output. The metronome sound will be output from the jack(s) whose check box is selected. Roland VS-2000 Owner’s Manual, Version Two Addendum 2—Version Two Enhancements www.RolandUS.com...

  • Page 16: The Master Edit Screen

    • Track Mixer—V-TRACK, MIX Switch, SOLO Switch, MUTE Switch • Input Mixer—MIX Switch, SOLO Switch, MUTE Switch • Effect return Mixer—MIX Switch, SOLO Switch, MUTE Switch Roland VS-2000 Owner’s Manual, Version Two Addendum Compressor parameter: Level...

  • Page 17: Change In Editing Method For Rhythm Arrange

    Rhythm Track memory. Once you begin editing an existing rhythm arrange, the VS-2000 holds it in a special temporary memory area—the display shows “TEMP” at the front of the rhythm arrange’s name.

  • Page 18: Using The Mouse To Input A Rhythm Pattern

    FF button, or decrease it by pressing the REW button. 10. Repeat Step 9 until you’ve finished creating or editing the rhythm arrange. 11. Save you work before selecting a new rhythm arrange or turning off the VS-2000. See “Saving a Rhythm Arrange” on Owner’s Manual Page 311.

  • Page 19: The Procedure For Editing Harmony Has Changed

    If TRACK/STATUS button 12 (b/#) is pressed, “b” or “#” symbols are now displayed in the HARMONY REALTIME RECORD screen and HARMONY STEP EDIT (NOTE) screen. Roland VS-2000 Owner’s Manual, Version Two Addendum 2—Version Two Enhancements www.RolandUS.com...

  • Page 20: Sequencing Harmonies In Step Time

    In conjunction with this change, the F button F1 (WAVE) which switched the WAVE area waveform display on/off has been eliminated. • HARMONY REALTIME RECORD screen • HARMONY STEP EDIT (NOTE) screen • HARMONY MICRO EDIT screen www.Roland.com Event list Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 21: The Harmony Micro Edit Screen

    If editing “Val1: pitch” causes an overlap with an existing note event, a “Note event overlaps! Overwrite?” dialog appears. Press ENTER/YES, the existing note event is overwritten. To cancel, press EXIT/NO. Roland VS-2000 Owner’s Manual, Version Two Addendum 2—Version Two Enhancements www.RolandUS.com...
  • Page 22 2—Version Two Enhancements www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 23: 3-Version Two Vga Overview

    3. Press F1 (SYSTEM). 4. Press F2 (Param3) and locate the OPERATION TARGET parameter. 5. Set OPERATION TARGET to VGA or LCD. On the main display, the VS-2000 asks: 6. Press ENTER/YES to proceed, or EXIT/NO to cancel the change.

  • Page 24: About The Main Display

    3—Version Two VGA Overview About the Main Display The LCD as Main Display When the LCD is designated as the main display, it behaves as described in the VS-2000 Owner’s Manual. The VGA as Main Display With a connected external VGA display, your mouse and keyboard become your main tools and the VS-2000 acts as a full-featured control surface.
  • Page 25 F buttons available at the bottom of the window. The contents of the window behave the same way they do on the VS-2000’s LCD. You can exit the screen by clicking the box in its upper-left corner or by pressing F6 (EXIT).

  • Page 26: About The Info Display

    You can choose what you’d like to see on the Info Display using the PAGE and F buttons (see Owner’s Manual Pages 69 and 68). You can press these buttons on the VS-2000 or click them on the VGA display.
  • Page 27 As you navigate the VS-2000’s LCD display, the Info Display automatically switches between various screens. You can manually switch to a few key screens, and you can lock the display so that it doesn’t change as you move around on the VS-2000. Selecting Info Displays Manually You can access several key screens from the VS-2000’s Home screen.

  • Page 28: When The Lcd Is Designated As The Info Display

    F3 (IDWave)—to view the Wave Display for the currently selected track (Owner’s Manual Page 239). • F6 (IDHold)—to lock the current contents of the LCD in place as you change screens on the VGA display. www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 29: 4-Vga Main Display Universal Elements

    The menus at the top of the VGA display give you quick mouse access to all of the features found in the VS-2000’s onboard menus, and also contain items unique to the VGA main display. To select an item from a menu: 1.

  • Page 30: The Track Menu

    Select STORE to save everything you’ve done to the current project since it was last saved or stored. This is the same thing as holding down SHIFT and pressing ZERO•STORE on the VS-2000 itself, as described on Owner’s Manual Page 99. The TRACK Menu The TRACK menu provides access to phrase, region, take and whole- track editing operations.

  • Page 31: The Utility Menu

    VS8F-2 and/or VS8F-3 effect expansion boards are installed. As shipped from the factory, the VS-2000 has two stereo effect processors, Effect 1 and Effect 2. With an optional VS8F-2 and/or VS-8F-3 installed, Effects 3 through 6 become available.

  • Page 32: Mixer Menu

    4—VGA Main Display Universal Elements MIXER Menu The MIXER menu allows you to display any of the VS-2000’s 40 mixer channels. You can do so in a variety of ways. To view: • all of the parameters of a single: •...
  • Page 33 To select a new effect patch or edit the current patch—click on the effect’s blue box in the matrix to display the processor’s Algorithm View screen (Owner’s Manual Page 219). Roland VS-2000 Owner’s Manual, Version Two Addendum 4—VGA Main Display Universal Elements...

  • Page 34: Ryhthm Track Menu

    4—VGA Main Display Universal Elements RYHTHM TRACK Menu The RYHTHM TRACK menu provides access to the operations associated with the VS-2000’s top-panel RHYTHM TRACK button. Menu item: RYHTHM TRACK PATTERN SETUP PATTERN SAVE REALTIME REC STEP REC/EDIT SMF IMPORT ARRANGE EDIT...

  • Page 35: Vga Control Bar

    MASTERING ROOM Click MASTERING ROOM to turn the Mastering Room on or off. When it’s on, click Master Tracks Record to start recording mastering tracks. Roland VS-2000 Owner’s Manual, Version Two Addendum 4—VGA Main Display Universal Elements Time code location...
  • Page 36 7. UNDO/REDO Click UNDO to reverse your last recording or editing action. If the REDO light on the VS-2000 is lit, click REDO to restore your latest undone action. 8. EXT SYNC Click EXT SYNC so it lights to synchronize the VS-2000 to an external device according to the current UTILITY menu Sync parameter settings.
  • Page 37 Click LOOP to display the AUTO PUNCH/LOOP window in which you can set loop start and end points. If the loop points have been set, click this button to turn on looped playback of the VS-2000’s hard disk recorder. Loop start and end points appear above the Home screen’s playlist as blue arrows.
  • Page 38 23. Project Information This readout shows the name of the current project, its sample rate and its recording mode. www.Roland.com PREVIOUS NEXT Project name Project recording mode Project sample rate Roland VS-2000 Owner’s Manual, Version Two Addendum 103, 102...

  • Page 39: Pan Knob Strip

    You can move from page to page by pressing If you prefer, press F1-F6 on a connected ASCII keyboard instead of clicking with your mouse or pressing the VS-2000’s physical F buttons. Use Tab as your PAGE button. Roland VS-2000 Owner’s Manual, Version Two Addendum 4—VGA Main Display Universal Elements...

  • Page 40: Status Strip

    REMAIN DISPLAY TYPE parameter. www.Roland.com Remaining space gauge Remaining space readout Roland VS-2000 Owner’s Manual, Version Two Addendum The status display flashes: “SOLO” in blue “MUTE” in yellow “MASTERING PLAY” in green “MASTERING REC”...

  • Page 41: 5-Vga Main Display Home Screen

    The VGA main display’s Home screen provides the basic starting point for VGA-based VS-2000 operations. In addition to the universal elements described in the previous chapter, the Home screen contains a selected set of meters that allow you to keep an eye on various volume levels, and a project playlist in which you can perform a variety of tasks, including the editing of track phrases and regions.

  • Page 42: Working With The Meters Strip

    5—VGA Main Display Home Screen • fx return channel levels—signals as they exit the VS-2000’s internal effect processors. • Aux, FX and Direct path levels—the two Aux master six FX master, and eight Direct paths. • output levels—signals as they exit the VS-2000’s output jacks and connectors.
  • Page 43 AUX/DIR—to display Aux bus and Direct path levels. • OUTPUT—to display output levels. • PAGE and F buttons on the VGA or on the VS-2000—Press PAGE until “INPUT” appears above F1 and press: • INPUT—to display input signal levels. •...

  • Page 44: The Playlist Area

    Edit control strip Playlist control panel switch Track controls Navigation and zoom buttons Now line WAVE DISPLAY button Scroll buttons Scroll bar Roland VS-2000 Owner’s Manual, Version Two Addendum See Owner’s Manual page:...
  • Page 45 VGA shows each phrase’s waveform for editing purposes. The VS-2000 generates editing waveforms when its transport is stopped—as a project plays, these waveforms move across the now line. When the transport stops again, the VS-2000 refreshes the playlist with new editing waveforms as necessary.

  • Page 46: Vga Playlist Track Controls

    SOLO button AUTOMIX STATUS button TRACK STATUS button FADER slider PAN slider 10. PHASE button Roland VS-2000 Owner’s Manual, Version Two Addendum 11. ATT slider 12. GROUP selector 13. LINK switch 14. FX Ins selector 15. DYNAMICS switch 16. EQ switch 17.
  • Page 47 Click a TRACK STATUS button repeatedly to set its track’s status— this is the same as pressing the corresponding physical TRACK STATUS button on the VS-2000. Roland VS-2000 Owner’s Manual, Version Two Addendum 5—VGA Main Display Home Screen Selected, contains audio...
  • Page 48 You can set up a channel’s EQ by drawing the desired curve with your mouse in the CH VIEW screen, as described on Page 63. www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum 150, 154...
  • Page 49 Click this status toggle: MUTE SOLO AUTOMIX STATUS TRACK STATUS Roland VS-2000 Owner’s Manual, Version Two Addendum 5—VGA Main Display Home Screen Send level MUTE status toggle SOLO status toggle un-mute all currently muted tracks. un-solo all currently soloed tracks.

  • Page 50: The Playlist's Measure Bar

    finger, and then dragging to the desired new location. • clear an object in the measure bar—holding down CLEAR on the VS-2000, positioning the mouse cursor over the object until it turns into a pointing finger, and then clicking the object.

  • Page 51: Editing Vga Playlist Track Audio

    Editing VGA Playlist Track Audio Editing track audio on the VGA main display is very much like editing with your mouse on the VS-2000’s internal LCD. To learn about editing audio with your mouse, see Owner’s Manual Page 242. The ways in which editing on the VGA differs from editing on the LCD are: •...
  • Page 52 Change an edit point’s location—move the now line to the desired location and click the edit point’s button. • Move the now line to an edit point—hold down SHIFT on the VS-2000 and click the edit point’s onscreen button. •...

  • Page 53: The Vga Playlist Control Panel

    • recall a locator—click the locator’s number. • clear a locator—hold down CLEAR on the VS-2000 and click the locator’s number. To name a locator—or perform other locator operations—click the LOC buttons (Page 38), respectively. Roland VS-2000 Owner’s Manual, Version Two Addendum Each track’s 16 V-Tracks are arranged...
  • Page 54 • recall a scene—click the scene’s number. • clear a scene—hold down CLEAR on the VS-2000 and click the scene’s number. To name a scene—or perform other scene operations—click the SCN buttons (Page 38), respectively. www.Roland.com Select scene banks with these buttons.

  • Page 55: The Vga Wave Display

    Amplitude zoom The time zoom is measured in samples. To close the wave display, click the WAVE DISPLAY button again. Roland VS-2000 Owner’s Manual, Version Two Addendum 5—VGA Main Display Home Screen Track name Phrase name Time zoom www.RolandUS.com...
  • Page 56 5—VGA Main Display Home Screen www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 57: 6-Vga Main Display Ch View Screens

    CH EDIT button is lit. • hold down the desired FX return channel’s FX button on the VS-2000 for few seconds to display a FX return channel’s CH VIEW screen (see Owner’s Manual Page 227). •...

  • Page 58: Universal Ch View Elements

    Click square button on left of RSS PAN so it’s lit, the appearance of the PAN parameter will be change. You can control the amount of the channel’s signal being sent to the effect. www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum Meters and PRE/ POST...

  • Page 59: Aux And Fx Send Controls

    AUX and FX Send Controls The CH VIEW screens contain AUX and FX send controls with which you can send the signal from any input, track or FX return channel to any of the VS-2000’s two Aux and six FX busses. To: •...

  • Page 60: Dir (Direct) 1-8 Selector

    7. AUTOMIX STATUS Button Click the AUTOMIX STATUS button to set the channel’s status when Automix is turned on. www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 61: Track Channel Parameter Strip

    9. AUTOMIX STATUS Button Click the AUTOMIX STATUS button repeatedly to set the channel’s status as desired when Automix mode is on. Roland VS-2000 Owner’s Manual, Version Two Addendum 6—VGA Main Display CH VIEW Screens www.RolandUS.com...

  • Page 62: Fx Return Channel Parameter Strip

    To link the parameter of FX send, click FX LINK so it lights. When it’s lit, parameters will be linked with add/even numbered partners. 6. AUTOMIX STATUS Button Click the AUTOMIX STATUS button repeatedly to set the channel’s status as desired when Automix mode is on. www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 63: Input And Track Channel Ch View Elements

    Each input and track channel CH VIEW screen contains a dynamics processor and EQ that can be set up by dragging your mouse in a graphic display, or manually. Dynamics Type-specific parameters Roland VS-2000 Owner’s Manual, Version Two Addendum Interactive graphic displays Parameters 6—VGA Main Display CH VIEW Screens...
  • Page 64 These parameters are described in Owner’s Manual Chapter 11. Parameter: KEY IN RATIO THRESHOLD ATTACK RELEASE A.GAIN LEVEL www.Roland.com For compressor, see Owner’s Manual Page: see Owner’s Manual Page: Roland VS-2000 Owner’s Manual, Version Two Addendum For expander, not applicable not applicable...

  • Page 65: Roland Vs-2000 Owner's Manual, Version Two Addendum Www.rolandus.com

    The EQ meters show the level the signal as it comes into the channel EQ and as it leaves EQ Parameters The CH VIEW EQ parameters are described on Owner’s Manual Page 162. Roland VS-2000 Owner’s Manual, Version Two Addendum www.RolandUS.com...

  • Page 66: Effect Insert Controls

    VS8F-2 and/or VS8F-3 effect expansion boards have been installed, so Effects 5 and 6 aren’t available. Insert effect matrix Roland VS-2000 Owner’s Manual, Version Two Addendum InsL InsR InsS This effect processor’s already being used by Track Channel 1.

  • Page 67: Fx Return Channel Ch View Elements

    FX Return Channel CH VIEW Elements LOOP FX ASSIGN LOOP FX ASSIGN displays the FX bus that carries signals to each of the VS-2000’s internal effect processors. Effect Algorithm Display The effect algorithm display shows the effect patch being used by the effect processor associated with the selected FX return channel.
  • Page 68 6—VGA Main Display CH VIEW Screens www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 69: 7-Mixer Views

    2. MON Level Knob (Info Only) The MON (for “MONITOR”) knob shows the level of the MONITOR bus. This level can be adjusted only using the VS-2000’s MONITOR knob. 3. AUTOMIX STATUS (A) Button Click the AUTOMIX STATUS button to set the MASTER fader’s Automix status when Automix is turned on.

  • Page 70: Aux And Fx Send Sliders

    When an odd/even pair of Aux and FX busses is linked, the slider for the even bus is replaced by a panning handle, as described on Page 73. www.Roland.com AUX Send Roland VS-2000 Owner’s Manual, Version Two Addendum Blue=On, Pst Red=On, Pre Black=No level...

  • Page 71: Input Mixer/Master Block View

    Input Mixer/Master Block View Select INPUT MIXER/MASTER BLOCK from the MIXER menu to view all of the VS-2000’s 10 input channel strips and MASTER BLOCK settings at once on the VGA. Input Channel Strips 1. DYNAMICS (DYN) On/Off Click this button to turn the channel’s dynamics processor on—so the button’s lit—or off.

  • Page 72: Master Block Strips

    When Automix is on, repeatedly click this button to set the Direct path’ Automix status. 4. Final Level Knob Drag this knob up or down to set the final level of the Direct path. www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum 150, 154...
  • Page 73 Roland VS-2000 Owner’s Manual, Version Two Addendum Mixer view Panning handle 7—Mixer Views...

  • Page 74: Track Mixer/Fx Return Mixer View

    Track Mixer/FX Return Mixer View Select TRACK MIXER/FX RTN MIXER from the MIXER menu to view all of the VS-2000’s 18 track channel and six FX return channel strips at once on the VGA. Track Channel Strips 1. DYNAMICS (DYN) On/Off Click this button to turn the channel’s dynamics processor on—when...
  • Page 75 Repeatedly click the TRACK STATUS button to set status of the corresponding hard disk recorder track. This is the same thing as pressing the track’s TRACK STATUS button on the VS-2000. 9. Channel Fader The position of the channel fader sets the level of signal coming out of the channel.

  • Page 76: Fx Return Channel Strips

    The position of the channel fader sets the level of signal coming out of the channel. 9. MONO Switch Click this button—so it lights—to collapse the effect processor’s stereo output to a mono signal. www.Roland.com AUX Send FX Send Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 77: 8-Vga Main Display Ez Routing Screen

    8—VGA Main Display EZ ROUTING Screen The VGA main display displays all four of the VS-2000’s EZ ROUTING screens at the same time to make all of your routing simple to perform. PATCH BAY view pane TRACK ASSIGN pane To display the EZ ROUTING screens, press EZ ROUTING on the VS-2000 or select ROUTING VIEW from the EZ ROUTING menu (Page 32).

  • Page 78: Recording Bus Attenuation

    The REC BUS ATT knob in the OUTPUT ASSIGN pane allows you to adjust the overall recording level to all tracks at once, as described on Owner’s Manual Page 275. This can be helpful when bouncing, and should otherwise be set to -6.0dB. www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 79: 9-Vga Main Display Automix Editing

    When you’re editing track channel Automix tracks, you can view the corresponding track audio by zooming in to display four or two tracks. To learn about recording Automix data, see Owner’s Manual Chapter 26, starting on Page 344. Roland VS-2000 Owner’s Manual, Version Two Addendum www.RolandUS.com...

  • Page 80: Targeting Automix Tracks And Data For Editing

    The menu shows all of the parameters that can be automated for the selected type of Automix track. www.Roland.com SECT button PRM button SECT pop-up menu PRM pop-up menu for track channel Automix tracks Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 81: Index

    CH EDIT parameters ... 60, 61 CH LINK button ... 57–67 CH VIEW screens ... 72, 75, 76 Channel fader Roland VS-2000 Owner’s Manual, Version Two Addendum ... 60, 61, 62 Channel Name ... 9 ChgDir ... 50 Clearing edit points Compressor.
  • Page 82 ... 33 playing back ... 33 recording ... 35 on/off ... 50 Measure bar ... 50 pop-up menu Menus. See individal entries Roland VS-2000 Owner’s Manual, Version Two Addendum ... 59 ... 59 ... 38 ... 50 ... 50...
  • Page 83 ... 50 measure bar ... 44 navigating ... 46 track controls ... 44 zooming Roland VS-2000 Owner’s Manual, Version Two Addendum ... 37 Position bar Pre and post ... 73 Aux busses ... 73 FX busses metering ... 58 CH VIEW screens ...
  • Page 84 ... 23 Overview ... 53 V-Track map ... 47, 61 V-Track selector ... 55 Wave display on VGA ... 35 Write-Protect ... 37 ZERO button ... 44 Zooming www.Roland.com ... 25 Roland VS-2000 Owner’s Manual, Version Two Addendum...

  • Page 85: Roland Vs-2000 Owner's Manual, Version Two Addendum Www.rolandus.com

    Notes Roland VS-2000 Owner’s Manual, Version Two Addendum www.RolandUS.com...
  • Page 86 Notes www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum...
  • Page 88 03675923 ’05-4-2KS...

Table of Contents